Features:
1.Automatic conveying power system, with non-level frequency conversing speed adjustment and auto synchronous board feeding functions.
2.Flux spray system using scanning spray nozzle,Japanese nozzles and rodless pneumatic cylinders and PLC control ,accurate and reliable
3.Remote infrared ceramic heating pipes are adopted in the preheating system which ensures good heat preservation effect ,high heating up speed and even temperature
4.Special alloy transportation chain claws , non-stick tin,reinforced, and ensure the quality of welding PCB board
5.Tin stove adopts imported high frequency conversion motor independent control,stable performance
6.Lead-free solder furnace with independent design ,environment protection and safety , easy to clean
7.Tin heating furnace uses high-speed PID and 2-stept independent outer heating control ,warm-up quickly and eliminates the flaws of stove tin explodes
8.With time controller ,can preset switch functions ,tin stove machine heating picks up in 90minutes
9.Reasonable design of environment protection,and automatic washing claw ,ensure the claws clean.
10.The design is reasonable and safe with sensitive fault alarm system ,to ensure the stable performance the safety of operators
1.Automatic conveying power system, with non-level frequency conversing speed adjustment and auto synchronous board feeding functions.
2.Flux spray system using scanning spray nozzle,Japanese nozzles and rodless pneumatic cylinders and PLC control ,accurate and reliable
3.Remote infrared ceramic heating pipes are adopted in the preheating system which ensures good heat preservation effect ,high heating up speed and even temperature
4.Special alloy transportation chain claws , non-stick tin,reinforced, and ensure the quality of welding PCB board
5.Tin stove adopts imported high frequency conversion motor independent control,stable performance
6.Lead-free solder furnace with independent design ,environment protection and safety , easy to clean
7.Tin heating furnace uses high-speed PID and 2-stept independent outer heating control ,warm-up quickly and eliminates the flaws of stove tin explodes
8.With time controller ,can preset switch functions ,tin stove machine heating picks up in 90minutes
9.Reasonable design of environment protection,and automatic washing claw ,ensure the claws clean.
10.The design is reasonable and safe with sensitive fault alarm system ,to ensure the stable performance the safety of operators
ITEMS | SPECIFICATION |
Control method | Press key+PLC |
Convey or motor | 1P AC220V, 60W |
Convey or speed | 0-1800mm/min |
PCB size | 30-300mm(w) |
Flux capacity | 6L |
Pre-heating zone | 600mm |
Solder pot temperature | Room temperature---300C |
Solder pot capacity | 180KG |
Wave motor | 3P AC220V, 0.18KW |
Finger cleaning pump | 1P AC220V 6W |
Convey or direction | L→ R (R→ L optional) |
Convey or angle | 3_6 º |
Flux pressure | 3_5BAR |
Power supply | AC380V 50HZ |
Normal working power/ | 3.5KW/18KW |
Outside dimension | 2570(L)*1200(W)*1500(H) |
Dimension | 1800(L)*1200(W)*1500(H) |
Net weight | 600KG |